ANALOG SYNTH DUAL VCO FRAC RACK MODULE

via this auction
video at the auction
and previously posted here
"Here is a Dual RED VCO on a Frac Rack American Panel. The Panel Dimension is 5.25" inches High and 6" inches wide.
The panel is 0.125" inches thick 6061 ALUMINUM. The jacks are 3.5mm type.

Wires are nicely wrapped with Aerospace grade aluminum shielding.

There are (2) Red VCO's that I was recently selling as a Kit. They have LM394 on sockets as the Dual Matched Pair. The vco's have been calibrated under a 15v Bi-polar Supply for the 1v/oct standard.

The pots are 6mm Knurled type for those that want to get there own knobs. Pot spacing is 1". There is a good amount of room to turn the dial compared to the 0.75" inch space commonly used.

here are each vco specs:
-(4)wave types: Ramp/saw/square/triangle
-(1)1v/oct CV direct input
-(1) linear FM direct input
-(1)1v/oct CV attenuated input (has knob)
-(1) pwm attenuated input (has knob)
-(1) sync input"
Update: this one sold, but another is coming per the comments below. You see all listings here.