34 Buchla Style Lopass Gate

YouTube via 7thDanSound | December 30, 2010 |

"This video is an attempt to achieve the effect of the Buchla Lopass Gate. It uses a lowpass filter and a VCA in order to test the theory. The Lopass Gate is known for its natural and smooth sound. The real ones are vactrol based however so no patch like this will be exact.

Artsy video of the resulting "song" here:
http://vimeo.com/18309589 [below]
Full length audio of the video here:
http://soundcloud.com/7thdansound/lpg... [below]"

Lopass Gate Impersonation and Arpeggio Chords from 7thDanSound on Vimeo.

"A short tune I made using my derived chords trick and an impersonation patch of the Buchla Lopass Gate. I think it sounds quite nice. Hope you do too!

I've been intrigued by the Buchla system ever since I first saw pictures of them. Not until several years later did I get to play one. It was the old 200 at EMS studio in Stockholm Sweden. Then the new Buchla 200e series were released and a friend got a few modules. I realized I had to have some. But, as usual, things came in between. Now finally, I'm starting my Buchla journey with a very small order. This video is to celebrate!"

LPG Arpeggio Chords by 7thDanSound

29 Clipper Rectifier

YouTube via 7thDanSound | December 09, 2010 | 3 likes, 0 dislikes

This video is a showcase of the synthesizers.com Q130 Clipper Rectifier module. I show some different audio modulations as well as modulation of control voltage.

6 minute audio jam with some more modules available at:
http://soundcloud.com/7thdansound/kno... and http://vimeo.com/17653853" :

Knobtune1 by 7thDanSound
"Playing the modular by the knobs. Kind of experimental but nice. Mostly synthesizers.com but there is an STG Wave folder in there too. Some reverb. Video of the sound is on Vimeo"

Knobtune1 from 7thDanSound on Vimeo.

32 MidiBox SID vs MonoMachine

YouTube via 7thDanSound | December 20, 2010 |

"This video is in response to a request from user SH4RCR4SH in the comments of this video http://www.youtube.com/watch?v=rPu1Na... [posted here]

It's a comparison between some basic sounds from the MidiBox SID and the SID machine in the Elektron MonoMachine. I'd say they compare fairly well!

Longer version of the song at the end available here:
http://soundcloud.com/7thdansound/sidpop"

SIDPop by 7thDanSound
"This is a tune I've had in the MonoMachine for quite a while. Did a quick recording of it to accompany my MidiBox SID vs MonoMachine comparison video on YouTube. I will have to rework this piece before it can be properly released."

23 Cyndustries Sawtooth Animator With Other Inputs

YouTube via 7thDanSound | November 24, 2010 |

"This is a demo of how the Sawtooth Animator sounds when fed somewhat unusual inputs. It works surprisingly well with triangle and sine wave forms but I also try noise, dual oscillators, drums and chords from an Elektron MonoMachine"

24 Cyndustries Sawtooth Animator LFOs

7thDanSound | November 24, 2010 |

"This video is a showcase of the Cyndustries Sawtooth Animator module using the LFO outputs. It has six of them and they are derived from what ever you put into the module. The speed of the LFOs vary with the input and if there is no input at all the LFOs stop so they can sort of be used as a crude sample and hold"

25 Synthesizers.com Oscillator Sync Behavior

7thDanSound | November 24, 2010 |

"This video shows how the Synthesizers.com Q106 oscillators behaves when synced to another oscillator. I have the oscillator aid module too and use its soft sync input to show how that works. I finish off by showing how voltage controlled sync works."

MiniMoogVoice

YouTube via 7thDanSound | September 01, 2010

"How to make your MiniMoog sound like it has a voice of its own, in 10 simple steps."

MiniMoog Overload

7thDanSound | September 06, 2010

"MiniMoogOverload"

Minimoog606

7thDanSound | September 13, 2010

"This episode shows what can happen to the sounds of a TR606 drum machine when sent through the MiniMoog"

63 Buchla + MonoMachine = Sweet

YouTube Uploaded by 7thDanSound on Apr 15, 2011
I spy a MATRIXSYNTH magnet at the start. :)
"Controlling and processing the Buchla through my Elektron MonoMachine proved to be totally lovely! This is something I'll spend a lot of time doing in the future. The rhythm based delay and reverb inside the MM and the very dynamic timbres of the Buchla match very nicely.

Long audio at sound cloud here:
http://soundcloud.com/7thdansound/buchla-belly"

Buchla Belly by 7thDanSound

71 Buchla Pan and Morph

YouTube Uploaded by 7thDanSound on May 19, 2011

"I'm starting out trying automated panning with the 292e and then I go on to more droning territory. I'm finding new and interesting sounds as I go along. It's incredible how deep and powerful this very small system is. And I'm not even using all of it!"

Update:

Buchla259 Morph and Pan by 7thDanSound
"This is a continuation of the patch from one of my videos. I just had to record some more of it."

28 Steep Decline (72dB Lopass)

YouTube via 7thDanSound | December 06, 2010 | 1 likes, 0 dislikes

"In this video I patch up all the filters I have in series to get the steepest slope low pass filter possible, 72dB! It gets pretty meaty already at 36dB but 72 sound like it could kill people! The filters are two synthesizers.com Q107 (gotta lov'em), an STG Soundlabs Post Lawsuit Lopass Filter and an STG Soundlabs Mankato.

6 minute audio jam available at:"

72dB Jam by 7thDanSound
"I patched together all the filters I have in my modular to one meaty big 72dB slope mother of a low pass filter! I bet you could kill people with the bass from this patch. This recording is a few minutes of playing around with the patch, changing the cutoff (of all filters at once) and modulating the cutoff with an LFO and an envelope. I also raise the resonance of the individual filters here and there.

I tried feeding back the output of the patch back into itself to get resonance through the whole chain but to no avail... Any one know what I did wrong?"

Buchla Multitrack

YouTube Uploaded by 7thDanSound on Aug 15, 2011

"Testing multitracking of the Buchla for the first time. A lot of fun but maybe a little rough around the edges, some harsh sounds here and there. But boy does the layering add to the depth of this thing!

Full length audio at: soundcloud.com/7thDanSound

www.niklaswinde.com"

101 Buchla 250e Controlled by 222e & Haunted Buchla and Moog Phaser

YouTube Uploaded by 7thDanSound on Jan 8, 2012

"Using the 222e to shift around the 250e while it's already running, the strobe mode is very useful!

www.niklaswinde.com"

Haunted Buchla and Moog Phaser

Uploaded by 7thDanSound on Jan 8, 2012

"Doing the Buchla+Moog phaser thing again and ended up with something that sounded haunted and eerie. I like this kind of thing a lot. It's amazing how hypnotizing these patches get. Note that the 261e mod oscillator is the source of sound here."

61 Buchla 292e Self Oscillating Patch

YouTube Uploaded by 7thDanSound on Apr 11, 2011

"I learnt from user boobtube356 that the Buchla 292e could be made to self oscillate. This may be useful to create another voice or simply to create another kind of sound. So as I just got my 292e I decided to try it."

Update:

62 Buchla 292e and 281e First Encounters

Uploaded by 7thDanSound on Apr 11, 2011

"I got some more modules for my Buchla. These are my first few patches with them. Cut down from about an hour of material this is presented a bit raw. But that's the way it should be!"

76 Bits and Buchlas [Buchla Chiptune!]

YouTube Uploaded by 7thDanSound on Jun 13, 2011

"Using the 259e for C64 style music. Full length audio at soundcloud.com/7thdansound/bitsandbuchla

www.niklaswinde.com"

5 Bonus: Mankato Kick

YouTube via 7thDanSound | September 27, 2010

"Episode 5 shows how to create a kick drum using the Mankato filter from STG Soundlabs. www.stgsoundlabs.com/"

6 Pulsewave as carrier

7thDanSound | September 27, 2010

"An oscillators pulse wave can actually carry audio if pitched high enough. Input the audio into the pulse width modulation input and pitch the oscillator above audio range. But be careful with your ears and speakers!"

Visit to EMS

YouTube Uploaded by 7thDanSound on Nov 3, 2011

"I visited EMS Stockholm to upgrade my Buchla a little. I traded my 12-wls cabinet for a 15-wls, got a 222e Multi-Dimensional Kinesthetic Input Port and traded my 206e for a 225e as I'm getting a 227e anyway.

EMS has a very nice vintage Buchla 200 system with some cool modules in it. I thought I'd patch it a little for fun. This is no serious patch really though due to lack of time. Of note is three very nice 259's and Mark Verbos' Time Domain Processor which is supposed to be an old Don Buchla design revamped more or less. Oh and two 296! That is one cool module. The patch has three parts, one drone kind of thing, some chirps and in the end a sort of cricket like noise which I personally liked best.

Throughout the video I've inserted pictures of the systems involved in the trade. We moved modules between the cabinets and had a really good time!

www.niklaswinde.com"

94 222e Tests

Uploaded by 7thDanSound on Nov 3, 2011

"So my Buchla now has a Multi-Dimensional Kinesthetic Input Port. Say that 6 times in a row real quick! That thing is just awesome with all it's programmability. I just wish it was a bit more responsive but I guess that's something I need to practice and learn instead.

This is my very first test with the thing so it's very basic and not really a demo, just playing some notes. Using it to control both my waveform generators pitch and timbre and some other things. I'm thinking I'll have a lot of fun with this!"

60 Dismantling the synthesizers.com modular

YouTube Uploaded by 7thDanSound on Apr 7, 2011

"I've sold my entire synthesizers.com modular synth. I'm on to new adventures in other formats. There will be a lot of new videos to cover those as they arrive and in the meantime there will be other cool videos.

The background music is all tunes I've made with this big and beautiful synth, put here as a tribute. They are all available on my bandcamp page. Please consider paying for a download to help me keep this thing going.

http://7thdansound.bandcamp.com/"

27 Angriest MiniMoog Ever

YouTube via 7thDanSound | December 02, 2010 | 2 likes, 0 dislikes

"So I tried patching up my vintage Model D MiniMoog to my synthesizers.com modular. Thought they'd play nice. But it seems the Mini got angry! The audio is straight out of the Mini, all the modular does is control it. Some reverb added here and there.

Full 15 minute audio is available at..." :

Angry MiniMoog by 7thDanSound

Synthesizers.com 38 Quantizer First Look

YouTube via 7thDanSound | January 17, 2011 |

"This is a first look at the synthesizers.com Q171 quantizer bank that I got the other day. I have no previous experience with quantizers so this is me testing it out. I find them extremely musical and very inspiring. This is a basic patch, more involved things to come.

Full length audio of a song recording made with this patch at:"

Quantizing away by 7thDanSound

E7 Buchla Easel Basics by 7thDanSound

Published on Jan 30, 2017 7thDanSound

"Time to get to grips with the Buchla Music Easel. In this first installment, oscillators!"

The Modcan is imminent

http://modcan.com/

Just thought this was a cool pic via 7thDanSound. Click on it for the larger image.

You might remember some of 7thDanSound's videos here. Looking forward to seeing what he does with these.

Buchla Swinging and Generating Triplets

YouTube Uploaded by dkimcg on Jan 17, 2012

"the 1/4 note sound and the swinging triplet playing sound generated from the same 1/4 note pulse. Based on DougCL's swinging clock tip as demonstrated by 7thDanSound. [this post]

Not a musical statement, mainly a study in swinging and triplets generated from a simple pulse.

I knew you could make triplets without a standard 1/3 divider.
And I thought it was pretty cool to be able to sequence swing and triplets from the 250e. :D

Only problem is I still can't figure out how to keep a tempo and swing a note before the clock without faking it by swinging the previous note way late to fake the early note w/o patching the pendulum's tempo with a quick negative modulation and syncing the pendulum to a master midi clock. Any ideas, if that makes sense?"