elektr4 and the ML-303 Bassline on YouTube

Anyone know more about the ML-303?

blinkenlights by elektr4 featuring an ML-303 Bassline

CLICK FOR MORE »

Acidcode ML 303 TB-303 Clone

via this auction

"Acidcode ML 303 v5 (software v6)
The ML 303 is the best and rarest clone of the legendary cult synthesizer Roland TB 303rd The circuits were adopted by the TB 303 and up, the ML is thus the clone of the TB sound comes closest. There were only a limited number of kits, which now no longer available.

The ML 303 offers:
- A great filter (Tune, Cutoff, Resonance, Envelope Mod, Decay, Accent, Volume)
- 2 waveforms Saw / Square
- Built-in step sequencer
- Stereo Out (Headphones), Mono Out
- LED running light display
- Powerful analog sound, the classic acid sound!

Compared to the ML TB has some modern features:

Midi In / Out (Can sound modules - Fashion be used as a pure tone generator)
Audio In (Mono)
LCD Display
-16 Memory banks of 8 patterns = 128 patterns (pattern length 16 steps)"

See the Acidcode label below for more posts including video.

ML-303 on YouTube

ML-303 [action]

CLICK FOR MORE »

Acidcode ML303 V5 - Roland TB303 Clone

via this auction

"Acidcode ML 303 v5 (software v7.02)

The ML 303 is the best and rarest clone of the legendary cult synthesizer Roland TB 303.
The circuits were adopted by the TB 303 and up, the ML is thus the clone of the TB sound comes closest. There were only a limited number of kits, which now no longer available.

The ML 303 offers:
- A great filter (Tune, Cutoff, Resonance, Envelope Mod, Decay, Accent, Volume)

- 2 waveforms Saw / Square
- Built-in step sequencer
- Stereo Out (Headphones), Mono Out
- LED running light display
- Powerful analog sound, the classic acid sound!

Compared to the ML TB has some modern features:

- Midi In / Out (Can sound modules - Fashion be used as a pure tone generator)
- Audio In (Mono)
- LCD Display
- 16 Memory banks of 8 patterns = 128 patterns (pattern length 16 steps)"


Please check Youtube and google for numerous sound examples. This unit has hand-matched Transistors.

Info:

The AT-1 attenuator kit has _not_ been installed but will be delivered with the unit.
If the sale is in Europe, the PSU will be included, otherwise you would need a 12V DC PSU. This is a private Sale -- no guarantee or warranty covered."

CLICK FOR MORE »

ML-303 on Acidcode - Precursor to the x0xb0x?

Bread, wine and a "303." I could go for that. Click image for the full shot. The caption on Acidcode reads, "... a little more than just a discontinued DIY project ;)" followed by a link to ladyada and the x0xb0x.

Update: according to Moogulator of sequencer.de there is no direct relation to the x0xb0x other than they are both clones of the Roland TB-303. The ML-303 was made in Germany. Not sure where ladyada is.

""here's a link [on sequencer.de] to the user manual for the ML-303 BassLine."

Via Awakened_Yeti in the comments of this post.

ShuffleBox

YouTube via Acidcoder.

More info on the ML-303 TB-303 clone here.

"This is a MIDI to DIN Sync interface that adds shuffle to old machines & sequencers like TB-303,TR-606,TR-808,MC-202,... Input can be MIDI or DIN, Output is MIDI & DIN timing shuffled. The shuffle amount can be adjusted with the potentiometer. The interface also has a Start/Stop button to stop and restart the synced device without losing synchronization. In this video you can see a modified 606 with internal shuffle (see my other videos) and an ML-303 (DIY TB-303 clone). The electronics inside the box will be available as a DIY kit for about 40-50€"

Acidcode Tweakbox

"The Acidcode Tweakbox is a new 2008 Synth DIY Project by the authors of the ML-303 BassLine: Please note: the picture shows the ML-303 V6, not the new Tweakbox. While the ML-303 has an analog audiopath the Tweakbox is now fully digital. That makes it very easy to solder and build. There are no SMD-Parts used. If you want to get informed as soon as the Tweakbox will be released just register with your eMail address in the Forum." Click here for more info. via sequencer.de.

ML-303 saw the noise (acid noise mashup)

Published on May 16, 2017 MIDGAARD BRIDGE

"ML-303 with fx recorded year 2008 and QM-309 with samples recorded year 1998"

We haven't had a post featuring the Acidcode ML-303 since 2014, unless you count this one from 2015. See the Acidcode label below for more posts.

Accenter on YouTube

Accenter Tool-1, TB-303


Roland TR-808 together with TB-303, overdrive, distortion


Roland TR-606 with internal MIDI INterface


ML-303 Bassline (Roland TB-303 DIY Clone)


BC-303 MIDI Controller, TB-303, Controllbox


YouTube via accenter. Sent my way via Tim.

Ultra 303

Click here for more info.

"ultra303 is a cpu replacement project for the tb 303 and the ml 303 clone...
which means the old cpu is desoldered and replaced by a new one... a cpu replacement adds new features to your tb 303 and makes things easier to handle it and beside this it turns your tb 303 into a state of the art synth.
the new firmware has still an internal sequencer with the "same" behavoir but with lcd display, midi implementation, saving, reading and editing your patterns via a midi interface on pc.

the entire editing on the 303 is lcd based. you can see the current note that one after and before and you can browse thru your pattern going steps back and some more features which were impossible with the old cpu
of course the firmware is realtime editing...means you don't need to stop the pattern replay during editing."

TB-303 Clone Contest

Via Ben of mus-ok.
"I read the post about the Acidlab Bassline Impressions and remembered this site which has audio and spec comparisons of:

Roland 303
Syntecno TeeBee Mark III
Future Retro Revolution
MAM MB 33 mkII
Acidlab Bassline
Future Retro 777
ML-303 v3.0 Acidcode
AS TB-X TB-303
Oakley TM3030

All the synths are playing the same line. Its pretty amazing how different they all sound. Not sure if thats a bad thing though..."

Title link takes you there. Thanks Ben!

Side note: the xoxbox is also listed as the Adafruit xoxbox. I know lady ada makes it, but I think this is the first time I heard of it with an Adafrut brand.

TB-303 emulation on STM Cortex M4

Published on Sep 14, 2015 Acidcoder

"VA TB-303 synthesizer running on the STM32F4 discovery board."

Update: the emulation is based on the Acidcode ML-303. Acidcoder was actually involved in the firmware coding for the Acidcoder.

303 saw the feedback (2008) acid / noise

YouTube via knarrbacken
"Acid/Noise with ML-303 sawtooth, Zoom BFX-708 + Smallstone, Locobox AD-15 & Behringer UB1002."

Acidcode ML 303 TB-303 Clone

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

AcidCode ML-303 (like TB-303 / x0b0x) Digital VCO and CPU Replacement from Scratch

Published on May 27, 2014 Sylwester Retrospektive·7 videos

"I replaced the 'digital brain' by an ARM Microcontroller and implemented the VCO in Software, so it doesn't drift while temperature changes etc."

Acidcode ML-303 Bass-Analog-Synthesizer

via eBay DE

CLICK FOR MORE »

Rare TSX Stepsequencer

via this auction

"To summarize the Main features of this lovely beast:

- 128 Patterns,
- Newest Firmware V07.02
- Realtime Edit,
- Random Pattern + Random Veloc.
- Groove Function (Shuffle),
- Midi In/Out (can work as master or slave)
- CV out /Gate out / Accent out / Trigger out ( Eurorack/Doepfer compatible),
- black Case,
- large 6.3mm jacks,
- external PSU"


Update via 7ate9 in the comments: "I think this is a acidcode transistorsex sequencer from the same guy(s) who made the ml-303 bassline.
homepage here: http://19642.forendienst.de/"

CLICK FOR MORE »

ACIDCODE ML-303 VERSION 4 COMPUTER CONTROLLED SYNTHESIZER

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"ORIGINALLY PURCHASED FROM THEGERMNYC WHICH HE USED FOR STUDIO PRODUCTION
THIS WAS DIRECTLY MADE FOR HIM PERSONALLY / HERE
I THEN PURCHASED IT IN OCTOBER 2017 / RESEARCH: AT MATRIXSYNTH (EXACT SAME)

THIS SYNTH IS IN WORKING CONDITION AND WITH MINIMAL COSMETIC BLEMISHES
INCLUDED WILL BE THE ADAPTER AND THE MANUAL WILL BE SENT BY .PDF TO THE OWNER
OR YOU CAN FIND THE MANUAL / HERE

PLEASE USE THE LINK SO YOU KNOW WHAT YOU ARE PURCHASING BEFORE YOU BUY THIS
IT IS NOT AN XOXBOX AND DOES NOT FUNCTION THE SAME"

CLICK FOR MORE »

ML 303 V4 ACID BASS LINE

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

ML-303v4 modified

flickr by pac209

"this ML has some unique mods, square wave PWM (sounds great), waveform pot, extra-low cutoff switch, extra short decay pot, overdrive...has MIDI too"

full size

Roland TB-303 clone