MIDI Modified Gakken SX-150 Analog synth

YouTube via StarfireMX
"I added a MIDI in to my gakken sx-150, here is what it sounds like with some chorus and reverb in ableton live.

I was just tweaking the knobs during this. Kick and snare are from live."

Pulsar synth with KP3

YouTube via StarfireMX
"Just added some cheap drums with some sound form the pulsar and some KP3 effects. Nothing is edited so there are some raw sounds within.

See more at: http://starfiretech.wordpress.com/"

128 Livid Enclosure for Starfire Boards

YouTube via StarfireMX — April 23, 2010 — Just an over view of the Livid Enclosure kit.

Arduinome with Starfire Logic Board and adjustable brightness

YouTube via StarfireMX
"Just my new logic board design with seeedstudio's button board in a container but I made it so you can adjust brightness."

Homemade Midi Sequencer Prototype

YouTube via StarfireMX
"Midi sequencer with 8 steps, BPM Control and some general CC knobs"

Auduino on Minduino and Mini Megaduino

YouTube via StarfireMX
"Rigged up an Auduino on my Minduino and hooked it up to my Mini Megaduino running as a make-shift VU meter.

Both the Minduino and Mini Megaduino are my designs for breadboard versions of the Arduino and the Mega Arduino."

Logic board with Seeedsudio button board Arduinome

YouTube via StarfireMX
"Just my new logic board design with seeedstudio's button board in a tupaware container."

Pulsar Save and Load

YouTube via StarfireMX. follow-up to this post.
"Just showing how the save and load works, also just some more sound sample, including the fixed gate on the saw wave."

Midi Sequencer Prototype & SX-150 Midi

YouTube via StarfireMX
"Simple Arduino Midi sequencer with 8 steps and BPM control"

Pulsar Lives!!!

YouTube via StarfireMX
"So I finally got my PCB for the Pulsar today, got it all together, besides an obvious problem of the power being wired backwards and I problem I already knew about in the filter but to late to fix, it works great and is smaller then I though :D

Please leave any comments or visit my electronics blog at http://starfiretech.wordpress.com"

The Pulsar (Mini chip synth)

YouTube via StarfireMX
"So I've been busy working on this little home made synth, it's gotten to a point where it's doing enough to show you all. Here is the low down.

1. 16 step sequencer
3. LCD info screen
2. Saw and Square wave
3. Adjustable gate
4. Adjustable Tempo
5. Adjustable Tone
6. Switchable high pass and low pass filter.

Best part is I have a circuit board on it's way and it all fits on a board about 1.5 inch by 3.5 inch so very small!

Plan on adding a few more things.
1. Line out (Pretty much just a headphone out right now)
2. Saw works but a bit funky gotta fix the code.
3. Presets (I hope)
4. Indicator for what step you are on.
5. Adjustable filter
6. I have a version where you can set the gate individually for each note, but I just prefer the over all gate, might try to make it switchable but the code at the moment is glitchy.

Let me know your thoughts!!

Thanks!!!"

Update via starfiretech in the comments:
"Thanks for the post, I also started a blog about this please check it out for more info.
http://starfiretech.wordpress.com"

Pulsar V0.9.5 Sound Sample

YouTube via StarfireMX
"9 Min sample of the new version with improved code and better PCB layout.
Please leave comments!"

Jam with Blofeld

YouTube via StarfireMX. via fischek. Hi quality embedded.
"Jammin with the Blofeld again, getting a acid sound going. Again all sounds are from the Blofeld played multi-timbraly (that a word?)"

Waldorf Blofeld Messin'

"Just messing with my Blofeld and Ableton Live. All sounds are Blofeld and all played at the same time using seven multi-timbral parts. Nothing fancy just screwing around."

Monome Quickie with KP3

YouTube via StarfireMX
"Just jamming and recording a short part when I was messing with the KP3 Kaos Pad also."

I love my Monome!

YouTube via StarfireMX
"This is by far one of the most interesting musical device I've ever came across, to find out more go to monome.org.

This was made with Ableton Live and a Monome 64, using impulse in ableton for drums, and both the lower 'bass' line and the main melody were made using the FAW Circle VST.

The Monome was controlling the main melody using Polygomé written by Stretta (stretta.com) and using the tilt feature of the Monome to control Circle live for some added variance.

I know it got a little long but I was having fun with the Monome and got carried away, beside isn't that what music is about sometimes!

Thanks for watching, please comment!!"

Arduinome 64 with Starfire Logic board and Livid buttons

YouTube via StarfireMX
"Exactly what it says, arduinome using my logic board and also the button PCB I made for the Livid buttons, I call it the Starnome LOL!"

Livid Button Pad

YouTube via StarfireMX. "Livid Button Pad"

Arduinome Logic Board Testing

YouTube via StarfireMX
"Testing my arduinome logic board prototype"

Just messing with me newly built Shruthi-1

YouTube via StarfireMX | November 24, 2010 | 0 likes, 0 dislikes

"Just messing with me newly built Shruthi-1, there is a minimal delay effect from live, but all sound is form the Shruthi."

Midibox SID Bassline Demo

YouTube via StarfireMX | December 26, 2010 |

"Built up a Midibox SID on a breadbaord. This is using one 8580 SID out of a a Commodore 64, using one of the default bassline patches.


There is a slight reverb on the first half, then I add more reverb and chorus on second part, also tweaking the internal filter of the SID."